The Fireview 6.5kw inset like its 4kw little brother has been designed to give optimum heat output to the room whilst only having a minimal protrusion of 115mm onto the hearth. The Fireview 6.5kw has been designed for easy installation.

To install this clever little stove you just need to remove your existing iron open grate and the pre-cast concrete fire brick (Chair Brick) the rear of the stove should fit nicely in the hole you just made, the flue adaptor comes as standard with this stove and is designed for fitting a 6 inch single skin flue pipe. However it is easy to remove via 2 bolts should you not need it.

As with all solid fuel appliances the only air allowed up the chimney should go through the stove first.

The standard finish for the above stove is metallic black, although the following finishes are also available from the factory:
Rich Brown Metallic, Honey Glow Brown, Blue Metallic and Forest Green.
(Ask your Dealer for a colour chart).

This stove is avaliable with either Brass or Stainless Steel Handles, Flat Top or Curved Canopy

Boiler options available are:

• 10,000 Btu Slab Boiler (takes the place of the rear fire board) 1 inch bsp socket, 1 inlet 1 outlet.
• 30,000 Btu  Integral Boiler (takes the place of all the fire boards)  1 inch bsp socket, 2 inlet 2 outlet.
• Please see instruction manual for plumbing suggestions